xirc2ps_cs

XIRC2PS_CS(4)                                                    XIRC2PS_CS(4)



NAME
       xirc2ps_cs - Xircom CE2ps (and newer) device driver


SYNOPSIS
       insmod  xirc2ps_cs.o  [pc_debug=n]  [full_duplex=n]  [irq_list=i,j,...]
       [if_port=n] [lockup_hack=n]


DESCRIPTION
       xirc2ps_cs is the low-level Card Services driver for the Xircom  16-bit
       PCMCIA  ethernet  adapters.  When this driver is attached to a card, it
       allocates the next available ethernet device.


PARAMETERS
       pc_debug=n
              Selects the PCMCIA debugging  level.   This  parameter  is  only
              available  if  the module is compiled with debugging enabled.  A
              non-zero value enables debugging.

       if_port=n
              Selects the transceiver type, for some CE3B-100 cards that  lack
              the  ability  to  autonegotiate.   For  such cards, a value of 1
              selects 10baseT, and 4 selects 100baseT.

       full_duplex=n
              Selects full duplex mode.  The default is 0 (half duplex).

       irq_list=i,j,...
              Specifies the set of interrupts that may be  allocated  by  this
              driver.

       lockup_hack=n
              Enables  a hack to avoid lockups on some cards.    Use this only
              if you really have lockup problems with your card.


SEE ALSO
       cardmgr(8), pcmcia(5).

BUGS
       Please report to <xircom-bugs@isil.d.shuttle.de>

AUTHOR
       Werner Koch <werner.koch@guug.de>



                           1.5  1998/09/15 12:40:59              XIRC2PS_CS(4)