aha152x_cs

AHA152X_CS(4)                                                    AHA152X_CS(4)



NAME
       aha152x_cs - Adaptec AHA-152X compatible PCMCIA device driver

SYNOPSIS
       insmod   aha152x_cs.o   [pc_debug=n]   [irq_list=i,j,...]   [host_id=n]
       [reconnect=n] [parity=n] [synchronous=n] [reset_delay=n] [ext_trans=n]

DESCRIPTION
       aha152x_cs is the low-level Card Services  driver  for  various  PCMCIA
       SCSI  adapters  that  are  compatible  with  the  Adaptec AHA-152X host
       adapter.   These  include  the  New  Media  Bus  Toaster,  the  Adaptec
       AHA-1460, and various other OEM cards.

PARAMETERS
       pc_debug=n
              Selects  the  PCMCIA  debugging  level.   This parameter is only
              available if the module is compiled with debugging  enabled.   A
              non-zero value enables debugging.

       irq_list=i,j,...
              Specifies  the  set  of interrupts that may be allocated by this
              driver.

       host_id=n
              Specifies the SCSI ID of the host adapter.  The default host  ID
              is 7.

       reconnect=n
              Enables  support  for  disconnect/reconnect,  if  non-zero.  The
              default is 1 (true).

       parity=n
              Enables SCSI parity checking.  The default is 1 (true).

       synchronous=n
              Enables negotiation of synchronous SCSI transfers.  The  default
              is 0 (false).

       reset_delay=n
              Specifies  a delay for SCSI bus resets, in 10 millisecond inter-
              vals.  The default is 100.

       ext_trans=n
              Enables the ``extended translation'' scheme for partition tables
              of drives larger than 1 GB.

AUTHOR
       David Hinds - dahinds@users.sourceforge.net

SEE ALSO
       cardmgr(8), pcmcia(5).



pcmcia-cs                     2000/06/12 21:24:47                AHA152X_CS(4)